UF Intelligent Keyboard Controller User’s Manual ————————————————— Model: UF50/60/70/80 Classic Read “Precautions” on page 4 before use
91 General View 1.1 Front Panel Keyaboard There are four models for the UF Classic series, comprising UF 50 Classic (49 keys), UF 60 Classic (61
10 Pitchbend It can change the pitch up and down, and when released it will automatically return to the center position. Modulation It will make
111.2 Rear Panel z The expansion board slot: it is used for an expansion board, such as a firewire expansion board or an sound module expansion boa
122 Installation Guide 2.1 Power Supply 1. Make sure the power switch is set to OFF. 2. Connect the AC adaptor to the POWER IN port in the rear pan
133 Connections Before you make these connections, please turn off all devices to avoid possible damage. Please refer to the fig. below to make
144 Basic Operation The【SHIFT】button: z Press and hold the【SHIFT】button then press the【OCTAVE/TRANSPOSE】 button for the transpose function. z Pres
15The【LAYER】button: Use this button to swich to the function layers for knobs, faders and buttons. There are three layers for knobs, faders and b
165 Turning On 5.1 Turning On Normally Set the power switch on the rear panel to ON to turn on this product. 5.2 Driver Installation After y
176 Basic Functions 6.1 Selecting A Voice Quickly z Rotate the data dial to find the voice# then press the【ENTER】button to send the MIDI data, or pr
18 The Pitch and key#(note#) list: OCTAVE# C C# D D# E F F# G G# A A# B -1 0 1 2 3 4 5 6 7 8 9 10 110 12 13 14 15 16 17 18 19 20 21 22 2
1Thank you for choosing CME UF50/60/70/80 Classic Intelligent Keyboard Controller Please keep all the important information here Attach your invoice
196.7 Pedal z For the two pedal jacks, each one can be used for continuouls pedal (e.g volume pedal) or switch pedal (e.g sustain pedal). z By de
206.10.3 Program Change z Operation:【SHIFT】ÖD1【Program Change】Ö【Set value】Ö【ENTER】 z MIDI message sent:CC#0 + CC#32 + Program z Default value:1 z
21 7 Advanced Functions 7.1 Dual Mode z When the dual mode is enabled, all the notes played will be sent to two MIDI channels, so the sound will be
227.4 Temperament z You can change the temperament other than the defult equal one. z Operation:【SHIFT】ÖA1【Temperament】Ö【Set value】Ö【ENTER】 z Defaul
238 Assigning 8.1 Assigning Controllers z You can use the ASSIGN function to re-define a control parts by data type and MIDI channel. z Operation:【
249 System Settings 9.1 Keyboard V.Curve z You can try different velocity curves to find your favorite one and get the best touch response for the v
259.4 Pedal A Type z If you change pedal A type from switch to continuous or vice versa, please set the proper pedal type. z Operation:【SHIFT】ÖE2【
2610 Display z You can choose the contents to display, so you will see the information you want. 10.1 Program Display z To display the voice#:
2711 U-CTRL mode Notes for the U-CTRL mode: z You can control popular computer software in the U-CTRL mode. In this mode, knobs, faders and buttons
2812 Registration Bank Access z You can save all the instrument settings to the registration BANK. z There are about 10 registration BANKs in
2Special Message Section This product utilizes batteries or an external power supply (adapter). Do NOT connect this product to any power supply or a
2915 Appendix 15.1 Initial Status Status Contral part Panel text Function all layers Pitch wheel PITCHBEND Pitchbend all layers Modulation hlMODU
30Layer A (indicator A on) Knob 3 KN3 CC#10-PAN,CH3 Layer A (indicator A on) Knob 4 KN4 CC#10-PAN,CH4 Layer A (indicator A on) Knob 5 KN5 CC#10
3115.2 Assignable Controllers List Controller# Name 000 Bank Select 001 Modulation wheel 002 Breath control 003 Undefined 004 Foot controller 005
32043 Expression 044 Effect control 1 045 Effect control 2 046 Undefined 047 Undefined 048 General Purpose #1 049 General Purpose #2 050 General
33089 Undefined 090 Undefined 091 Reverb Send Level 092 Tremolo Depth 093 Chorus Send Level 094 Celeste/Detune Depth 095 Phaser Depth 096 Data entry
34134 * Low Pass Filter Cutoff Frequency 135 * Low Pass Filter Resonance 136 * High Pass Filter Cutoff Frequency 137 * EQ Low Gain 138 * EQ Hig
3515.3 GM Voice List Voice# Name Voice# Name Voice# Name Voice# Name 001 GrandPno 033 Aco.Bass 065 SprnoSax 097 Rain 002 BritePno 034 FngrBas
3615.4 Scale List Pitch name C C# D D# E F F# G G# A A# BScale No. Note number: 1 2 3 4 5 6 7 8 9 10 11 12001 Major Scale CCDDEFFGG A A B002
37
38
3FCC INFORMATION (U.S.A) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in th
39
4115.5 Note List Note # Name Note # Name Note # Name Note # Name 000 C-2 032 G#0 064 E3 096 C6 001 C#-2 033 A0 065 F3 097
4215.7 Velocity Curve List Normal Soft 1 Soft 2 Hard 1 Hard 2 Expand Compress Fixup 1 Fixup 2 Fixup 3
4315.8 Aftertouch Curve List Off Normal Soft 1 None Soft 2 Hard 1 Hard 2 Expand Compress
4415.9 MIDI Route MIDI route in the normal mode LOCAL S.WUSB OUT AEXPANSIONKEYBOARDMIDI OUT&WIDI OUT(WIDI OUT SW)USB IN AUSB IN BUSB OUT BSend
4516 Troubleshooting Trouble with possible reasons and solution z After turning on the power switch, the instrument is not powered on: 1. Make s
4617 Specifications z Keyboard UF50 Classic:49 keys(C1 - C5), (velocity sensitive and aftertouch) UF60 Classic:61 keys(C1 - C6), (velocity sensi
4718 MIDI Implementation Chart Model: UF 50/60/70/80 Classic MIDI Implementation chart Ver: 1.0 Function Transmitted Recognized Basic C
2010 - 05 (Version 3.0) Central Music Co. Tel: +86-10-8580 1115 Fax: +86-10-8580 1114 Web: www.cme-pro.com E-mail for supp
4 PRECAUTIONS IMPORTANT Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical sh
5systems are not normally affected by radio transmissions. The manufacturer of such equipment can advise if it is adequately shielded from radio tran
6CAUTION: Setting up Do not connect the instrument dduring a thunderstorm. Do not set up the power cord or socket in a damp place, u is speci
7Content 1 General View.........
811 U-CTRL mode..............................27 12 Regist
Kommentare zu diesen Handbüchern