CME WIDI-X8 Bedienungsanleitung Seite 12

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 20
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 11
5V DC IN, center positive.
Indicator
The indicator has two colors, red for power indicator and green for signal indicator.
Frequency set button
Press the button shortly for one-to-multi function (finding and switching).
Press and hold the button for about three seconds for automatic radio channel setting
in the automatic frequency-setting mode, or for returning to the original frequency in the
manual frequency-setting mode.
Route mode selector
The route mode can be set to 1/2/3.
Power switch
“O” for power OFF, “I” for power ON, “ “ for ”LOCK”. When the switch is set to
“LOCK”, the frequency adjust button is disabled.
Frequency setting mode selector and radio channel selector (DIPs)
DIP 1 is reserved, please do not change its position; DIP 2 is the frequency setting
mode selector, position “1” for automatic frequency setting mode and position “0” for
manual frequency setting mode. DIP 3-8 are used to select radio channel, please see
appendix for detail.
3.1 Power supply
You can use any one of the three ways for WIDI-X8 power supply, 2 x AA size battery,
USB bus power, or DC IN.
2 x AA size battery
Set the power switch to ON, when the power supply is OK, the red indicator is on. If the
battery will run out of power, the red indicator will blink.
USB bus power
After starting your computer, connect the WIDI-X8 to the computer via USB cable, then
switch on the WIDI-X8 and the power indicator is on.
If it is the first time the WIDI-X8 is connected to the computer, the OS will automatically
install the device driver. Follow the instructions for driver installation. When asked for the
device driver, please let the OS automatically search the driver. When the installation is
completed, the WIDI-X8 will show in the system device list as the “USB Audio Device”.
DC IN
Connect 5V DC center positive to the DC IN port, then switch on the WIDI-X8 and
the power indicator is on.
3.2 Radio channel setting
The WIDI system supports 64 radio channels for MIDI data transfer. Suppose each
12
Seitenansicht 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare